New TasNetworks' service and installation rules

The new version of TasNetworks’ Service and Installation Rules (version 8.2) came into effect on 1 July 2022. The rules specify TasNetworks’ minimum requirements for connecting to their low voltage distribution network.

There is also an Interim Connection Arrangement document which carries over some existing requirements from the previous Rules. This will remain in place until the new CBOS metering code of practice commences. When the new CBOS metering code of practice is published we will notify all electrical contractors.

Read the rules (external link)

Updated: 20 Jul 2022

This page has been produced and published by the Consumer Building and Occupational Services Division of the Department of Justice. Although every care has been taken in production, no responsibility is accepted for the accuracy, completeness, or relevance to the user's purpose of the information. Those using it for whatever purpose are advised to verify it with the relevant government department, local government body or other source and to obtain any appropriate professional advice. The Crown, its officers, employees and agents do not accept liability however arising, including liability for negligence, for any loss resulting from the use of or reliance upon the information and/or reliance on its availability at any time.