logos

CPD opportunities for all licensed practitioners

There are now some great CPD opportunities available through the CPD toolbox for all licensed practitioners.

Technical courses on the plumbing Standard AS 3500 – 8 CPD Points

This is a bundle of courses developed by Master Plumbers, Tasmania in partnership with Pointsbuild Pty Ltd to provide an explanation of the changes to AS/NZS 3500 Australian Standard. The major changes in each Section of the AS/NZS 3500.1: 2021, AS/NZS 3500.2:2021, AS/NZS 3500.3:2021 ,AS/NZS 3500.4:2021 standard will be highlighted to assist the learner to recognise and apply the changes. Sections of this course have been reproduced by Master Plumbers Tasmania with the permission of Standards Australia Limited. Copyright in AS/NZS 3500 (2021) vests in Standards Australia [and Standards New Zealand, and/or ISO/IEC]. Users must not copy or reuse this work without the permission of Standards Australia or the copyright owner.

Courses in Bundle:

  1. AS-NZS 3500-1:2021
  2. AS-NZS 3500-2:2021
  3. AS-NZS 3500-3:2021
  4. AS-NZS 3500-4:2021

THIS COURSE BUNDLE WAS $208 AND IS NOW $52.00

WHS course bundle – 6 CPD Points

This bundle gives plumbers all the CPD courses needed from a Work Health and Safety (WHS) point of view and covers the roles and responsibilities of the employee, manager and employer. This Bundle consists of 6 individual CPD courses and is worth 6 CPD points. For further information on each of these courses, please click on the links below, and their contents will appear on the right-hand side of this page. If you wish to purchase this Bundle, please click on the 'Add to Cart' button.

Courses in Bundle:

THIS COURSE BUNDLE WAS $390 AND IS NOW FREE!

NCC courses bundle

This bundle gives plumbers all the online self-paced CPD courses in the National Construction Code (NCC). This Bundle consists of 6 individual CPD courses and is worth 6 CPD points.

Courses in Bundle:

THIS COURSE BUNDLE WAS $312 AND IS NOW $78.00

Free courses

The following courses were $65.00 and are now available at no cost. All courses are worth 1 CPD Point each.

  • Apply OHS Requirements, Policies and Procedures
  • Asbestos Awareness
  • Dust Diseases
  • Heat and UV Exposure
  • Managing Workplace Bullying
  • Manual Handling Awareness
  • Mental Health in the Workplace
  • Personal Injury
  • Preventing Workplace Injury
  • Resilience at Work
  • WHS Programs in the Construction Industry (online)
  • WHS Risk Management
  • Working at Heights in Construction
  • Working in Confined Spaces in the Construction Industry
  • Safe Work Method Statements
  • Understanding the Changes to WHS Legislation
  • Toolbox Talk
  • Wellbeing at Work Webinar

For registration please go to the CPD Toolbox.

Technical courses

To access these courses please go to the CPD Toolbox.

Course

Was

CPD Points

Now

AS-NZS 3500-1:2021

$65

2

$13

AS-NZS 3500-2:2021

$65

2

$13

AS-NZS 3500-3:2021

$65

2

$13

AS-NZS 3500-4:2021

$65

2

$13

Building Approvals in Tasmania

$65

1

$13

Australian Regulatory Framework for Building and Plumbing 2019

$65

1

$13

Dial Before You Dig

$65

1

$13

Drone Technology in the Workplace

$65

2

$13

Energy Compliance in NCC Volume One

$65

1

$13

Energy Compliance in NCC Volume Two

$65

1

$13

Energy Compliance in the NCC: An Introduction

$65

1

$13

Five Key Energy Efficiency Strategies for Homes

$130

2

$26

NCC Volume One

$65

1

$13

NCC Volume Three

$65

1

$13

NCC Volume Two

$65

1

$13

NCC: A Performance-based Code

$65

1

$13

Read and Interpret Plans and Specifications

$65

1

$13

Safety in Design

$260

8

$52

Section J of NCC Volume One - Course 2

$65

1

$13

Section J of the NCC Volume One - Course 1

$65

1

$13

Systems Thinking in Residential Design

$130

2

$26

Understanding the NCC Disability Access Provisions

$65

1

$13

Understanding the NCC Energy Efficiency Provisions V1

$65

1

$13

Understanding the NCC Energy Efficiency Provisions V2

$65

1

$13

Using the NCC 2019

$65

1

$13

Introduction to Planning

$65

1

$13

Working with Planners

$65

1

$13

NCC seminars Volumes 1 and 2, and Volume 3 Plumbing Code of Australia

Available in Launceston and Hobart. For registration see our CPD calendar.

Wastewater courses

Aerated Wastewater Treatment System Servicing and Maintenance (Plumbers and Plumbing Permit Authorities)

Date: 26-28 October 2022

Location: Hobart TAS

Course Schedule - Environmental Training Whitehead Associates

On-site Wastewater Management (Building Surveyors, Engineers, Plumbers and Plumbing Permit Authorities)

Date: 31/10 – 2/11

Location: Hobart TAS

Course Schedule - Environmental Training Whitehead Associates

Updated: 19 Aug 2022

This page has been produced and published by the Consumer Building and Occupational Services Division of the Department of Justice. Although every care has been taken in production, no responsibility is accepted for the accuracy, completeness, or relevance to the user's purpose of the information. Those using it for whatever purpose are advised to verify it with the relevant government department, local government body or other source and to obtain any appropriate professional advice. The Crown, its officers, employees and agents do not accept liability however arising, including liability for negligence, for any loss resulting from the use of or reliance upon the information and/or reliance on its availability at any time.